ANGLE BRACKET MOUNT The angle bracket rests on the top of your trim and is secured by two small fasteners. This mounting method is the easiest way to install our shelves and works well with most windows that have at least 2" of depth available. Fastest installation - Since our units come fully assembled you can have your new shelves in the window in about 5 minutes. There should be at least 8″ of distance between the top of your trim and the ceiling so that you will have enough room to install the fasteners into the top of the Angle Bracket. HOOK MOUNT Deeper windows can take advantage of using hooks to install our hanging window plant shelves. Hooks, along with being easy to install, perfectly compliment the minimalist styling of the shelves. To use hooks the window needs to be at least 4″ deep. NO TRIM MOUNT If your window does not have trim and is not deep enough to use hooks you can still install our shelves by utilizing the included mounting block. Install the MOUNTING BLOCK on the wall about 2" above your window and then attach the ANGLE BRACKET to the mounting block with the included fasteners. There should be at least 8″ of distance between the top of the mounting block and the ceiling so that you will have enough room to install the fasteners into the top of the Angle Bracket. MEASURING YOUR WINDOW DEPTH Measure the inside depth of your window to help determine which type of mount will work best for your window. ANGLE BRACKETS require about 2" of depth for our shelves to hang properly. HOOKS require 4" of depth for our shelves to hang properly. Angle Bracket Mount Hook Mount No Trim Mount Block Measure Window